Network
T. Y. Yang
- Purdue University
- Worcester Polytechnic Institute
- School of Aeronautics and Astronautics
- Purdue University
External person
Igor Kaljević
- Carnegie Mellon University
- AYT Corporation
- ANSYS, Inc.
- Ohio Aerospace Institute
- Department of Civil Engineering
- Dept. of Civil and Environ. Eng.
- Department of Civil Engineering
- ANSYS, Inc.
External person
Steven J. Owen
- Sandia National Laboratories
- Carnegie Mellon University
- ANSYS, Inc.
- Dept. of Civil and Environ. Eng.
- Parallel Computing Sciences Department
- Department of Civil and Environmental Engineering
- Department of Civil Engineering
- ANSYS, Inc.
External person
Rakesh K. Kapania
- Purdue University
- Virginia Polytechnic Institute and State University
- Worcester Polytechnic Institute
- Aerospace and Ocean Engineering
- School of Aeronautics and Astronautics
- Purdue University
- Virginia Tech College of Engineering
External person
J. H. Kane
- Clarkson University
- Worcester Polytechnic Institute
- Clarkson University
- Mechanical Engineering Department
- Mechanical and Aeronautical Engineering Department
- Mechanical and Aeronautical Engineering Department
- Worcester Polytechnic Institute
External person
A. Jagota
- DuPont
- Lehigh University
- CR and D
- Department of Chemical Engineering
- CR and D
- CR&D
- Lehigh University
External person
S. A. Canann
- Carnegie Mellon University
- ANSYS, Inc.
- Dept. of Civil and Environ. Eng.
- Department of Civil Engineering
- Department of Civil and Environmental Engineering
- ANSYS, Inc.
External person
Srdan Šimunović
- Oak Ridge National Laboratory
- Carnegie Mellon University
- Process Modeling Group
- Department of Civil Engineering
- Research Associate, Metals and Ceramics Division
- Process Modeling Group
External person
R. Aithal
- Worcester Polytechnic Institute
- University of Puerto Rico
- Southwest Research Institute
- Ford Motor Company
- Florida A&M University
- Mechanical Engineering Department
- Dept. Of Mats
- Worcester Polytechnic Institute
External person
C. T. Dyka
- Naval Surface Warfare Center
- Dahlgren Division
- General Dynamics
- Electric Boat Division
External person
R. A. Meric
- Worcester Polytechnic Institute
- Istanbul Technical University
- Mechanical Engineering Department
- Department of Space Sciences and Technology
- Worcester Polytechnic Institute
External person
A. Z.I. Salem
- Carnegie Mellon University
- Dept. of Civil and Environ. Eng.
- Department of Civil Engineering
- Department of Civil and Environmental Engineering
External person
P. Rahulkumar
- ANSYS, Inc.
- Dept. of Civ. Engrg., Carnegie Mellon Univ.
- Carnegie Mellon University
- Dept. of Civil and Environ. Eng.
- Department of Civil Engineering
- ANSYS, Inc.
External person
O. P. Agrawal
- Southern Illinois University
- Department of Mechanical Engineering and Energy Processes
External person
S. Khan
- University of South Florida
- Oak Ridge National Laboratory
- Computational Sciences and Engineering
- Civil and Environmental Engineering
- Civil/Environmental Engineering
- Computer Science and Mathematics Division
- University of South Florida
External person
Yu Xu
- Carnegie Mellon University
- Department of Civil Engineering
- Dept. of Civil and Environ. Eng.
External person
David R. White
- Carnegie Mellon University
- Sandia National Laboratories
- Department of Civil and Environmental Engineering
- Dept. of Civil and Environ. Eng.
External person
H. R. Piehler
- Carnegie Mellon University
- Department of Materials Science and Engineering
- Center for Advanced Deformation Processing Research Department
External person
Taft H. Broome
- Dept. of Civ. Engrg., Howard Univ.
- Howard University
- Department of Civil Engineering
- Dept. of Civ. Engrg., Howard Univ.
External person
A. Acharya
- Carnegie Mellon University
- Department of Civil Engineering
- Department of Civil and Environmental Engineering
External person
A. R. Ganguly
- Oak Ridge National Laboratory
- Computational Sciences and Engineering
- Computational Sci./Engineering Div.
- Computer Science and Mathematics Division
External person
W. A. Kistler
- Worcester Polytechnic Institute
- Mechanical Engineering Department
- Worcester Polytechnic Institute
External person
Luciano M. Bezerra
- Carnegie Mellon University
- Comissão Nacional de Energia Nuclear
- Department of Civil Engineering
- Department of Civil Engineering
External person
H. Huang
- University of South Florida
- Civil and Environmental Engineering
- Civil and Environmental Engineering
- University of South Florida
External person
H. Tang
- Carnegie Mellon University
- Massachusetts Institute of Technology
- Department of Civil Engineering
- Department of Civil and Environmental Engineering
External person
M. Seshadri
- Carnegie Mellon University
- Intel
- University of South Florida
- Department of Civil and Environmental Engineering
- Department of Civil and Environmental Engineering
- University of South Florida
External person
Hui Li
- Carnegie Mellon University
- Carnegie Mellon University
- Center for Advanced Deformation Processing Research Department
External person
Arthur P. Boresi
External person
Henry T.Y. Yang
- University of California at Santa Barbara
- Purdue University
- School of Aeronautics and Astronautics
- Purdue University
External person
M. M. Stanišić
- Purdue University
- School of Aeronautics and Astronautics
- Purdue University
External person
P. D. Nicolaou
- Carnegie Mellon University
- Department of Materials Science and Engineering
- Center for Advanced Deformation Processing Research Department
External person
Vladimir Protopopescu
- Oak Ridge National Laboratory
- Computational Sciences and Engineering
- Computer Science and Mathematics Division
External person
A. Gupta
- Worcester Polytechnic Institute
- Mechanical Engineering Department
- Worcester Polytechnic Institute
External person
Abhijit Chandra
- University of Arizona
- Department of Aerospace and Mechanical Engineering
- The University of Arizona College of Engineering
External person
George Ostrouchov
- Rutgers - The State University of New Jersey, New Brunswick
- Oak Ridge National Laboratory
- University of Tennessee, Knoxville
- Computer Science and Mathematics Division
External person
James D. Lee
- George Washington University
- Department of Electrical Engineering and Computer Science, The George Washington University
External person
William Barry
- King Mongkut's University of Technology Thonburi
- Asian Institute of Technology
- School of Civil Engineering
- Ctr. Operations Fld. Robotics Devmt.
External person
Joseph Rencis
- University of Arkansas System
- ASEE-Mechanical Engineering Division
- ASME Mechanical Engineering Department
- Worcester Polytechnic Institute
- Department of Mechanical Engineering
- Department of Mechanical Engineering
- Mechanical Engineering Department
- University of Arkansas
- University of Arkansas
- Worcester Polytechnic Institute
External person
Christophe Bailly
- École centrale de Lyon
- Ecole Nationale Supérieure des Techniques Avancées (ENSTA
- Fluid Mechanics and Acoustics
- ComUE Paris-Saclay
- ENSTA Paris
External person
Graham V. Candler
- University of Minnesota Twin Cities
- AIAA Thermophysics Technical Committee
- Aerospace Engineering and Mechanics
- AIAA
External person
Anthony N. Palazotto
- United States Air Force Institute of Technology
- American Society of Civil Engineers
- American Academy of Mechanics
- Department of Aerospace Engineering
- AIAA
External person
C. Shet
- Florida State University
- Carnegie Mellon University
- Department of Mechanical Engineering
- Department of Mechanical Engineering
- Materials Science and Engineering
External person
Xiaolin Zhong
- University of California at Los Angeles
- AIAA Plasmadynamics and Lasers Technical Committee
- AIAA Transition Study Group
- American Physical Society
- Department of Mechanical and Aerospace Engineering
- University of California at San Diego
- AIAA
External person
R. H. Moore
- Carnegie Mellon University
- Department of Civil and Environmental Engineering
External person
Balakumar Balachandran
- University of Maryland, College Park
- ASME Technical Committees of Multi-Body Systems
- Dynamics and Control of Structures and Systems
- Mechanical Engineering
- ASME International
- AIAA
External person
Mehdi Ahmadian
- Department of Mechanical Engineering
- Virginia Polytechnic Institute and State University
- ASME International
- AIAA
External person
Allen Plotkin
- Structural Materials Branch
- AIAA
- ASME International
- Air Force Research Laboratory
External person
A. G. Mamalis
- National Technical University of Athens
- Department of Mechanical Engineering
External person
Datta V. Gaitonde
- Wright-Patterson AFB
- Wright State University
- High-Speed Flows Group
- AIAA
- Air Force Research Laboratory
External person
Ndaona Chokani
- AIAA's Transition Study Group
- Aerodynamics Measurement Technology Technical Committee
- Thermophysics Technical Committee
- AIAA
External person
J. T. Borggaard
- Worcester Polytechnic Institute
- Mechanical Engineering Department
- Worcester Polytechnic Institute
External person
Kozo Fujii
- JAXA Institute of Space and Astronautical Science
- Pressure-sensitive Paint Measurement System
- Japan Society of Mechanical Engineers (JSME
- MOSAIC project on the Technology
- Department of Space Transportation
- AIAA
External person
Arthur P. Boresi
External person
J. C. Hill
- Carnegie Mellon University
- Department of Civil and Environmental Engineering
External person
Elaine Oran
- Naval Research Laboratory
- American Physical Society
- Institute for the Dynamics of Energetic and Reactive Systems (IDERS
- National Academy of Sciences
- AIAA
External person
Suresh K. Aggarwal
- University of Illinois at Chicago
- Combustion Institute
- Department of Mechanical Engineering
- ASME International
- AIAA
External person
J. Cheng
- Worcester Polytechnic Institute
- Mechanical Engineering Department
- Worcester Polytechnic Institute
External person
W. King
- Carnegie Mellon University
- Lawrence Livermore National Laboratory
- Dept. of Civil and Environ. Eng.
External person
Kirti Karman N. Ghia
- ASME International
- University of Cincinnati
- Graduate School
- Aerospace Engineering and Engineering Mechanics
- AIAA
External person
Achille Messac
- ASME International
- Rensselaer Polytechnic Institute
- Multidisciplinary Design Optimization (MDO)
- Department of Mechanical and Aerospace Engineering
- Technical Committee (TC)
- AIAA
External person
Robert P. Lucht
- ASME International
- Society of Automotive Engineers
- Optical Society of America
- AIAA
External person
Eli Livne
- University of Washington
- AIAA Multidisciplinary Design Optimization Technical Committee
- National Aeronautics and Space Administration
- Boeing HSCT Aeroservoelastic Working Group
- Department of Aeronautics and Astronautics
- AIAA
External person
Jay P. Gore
- Purdue University
- ASME International
- Board of Advisors
- American Society of Mechanical Engineers (ASME)
- Central States Section
- School of Mechanical Engineering
- AIAA
- Purdue University
External person
G. Viegelahn
- Michigan Technological University
- Department of Mechanical Engineering and Engineering Mechanics
- Michigan Technological University
External person
Christophe Pierre
- University of Michigan, Ann Arbor
- San Diego State University
- Department of Mechanical Engineering
- Department of Aerospace Engineering
- ASME International
- AIAA
- San Diego State University
External person
James D. Lee
- Department of Mechanical and Aerospace Engineering
- George Washington University
External person
B. L. Kashava Kumar
- Clarkson University
- Mechanical and Aeronautical Engineering Department
- Clarkson University
External person
S. Darjani
- New Jersey Institute of Technology
- Department of Civil Engineering
- Department of Civil and Environmental Engineering
- Department of Civil Engineering
External person
Ajit K. Roy
- ASME International
- Carnegie Mellon University
- AIAA Technical Committee for Structures
- Dept. of Civil and Environ. Eng.
External person
D. E. Manolakos
- National Technical University of Athens
- Department of Mechanical Engineering
External person
Anatolitumin
- University of California at Los Angeles
- Department of Mechanical and Aerospace Engineering
- University of California at San Diego
- AIAA
External person
Kazhikathra Kailasanath
- Naval Research Laboratory
- Institute of Physics
- Center for Reactive Flow and Dynamical Systems
- AIAA
External person
Ronald M.C. So
- AIAA
- ASME International
- National Aeronautics and Space Administration
- AIAA History Technical Committee (TC
External person
Harsha K. Chelliah
- University of Virginia
- AIAA Propellants and Combustion Technical Committee
- Mechanical and Aerospace Engineering
- AIAA
External person
Tov Vestgaarden
- University of South Florida
- Department of Civil and Environmental Engineering
External person
Subrahmanya Mudhivarthi
- University of South Florida
- Department of Mechanical Engineering
- Nanomaterials and Nanomanufacturing Research Center
- University of South Florida
External person
Anthony M. Springer
- Historic Aerospace Sites Program
- Aerospace and Mechanical Engineering
- University of Arizona
- Applied Mathematics Program
- AIAA
External person
Natalia Alexandrov
- NASA Langley Research Center
- Aeronautics Systems Analysis Branch
- AIAA
External person
Pasquale M. Sforza
- AIAA
- ASME International
- Center for Composite Materials Research at North Carolina
- A and T State University
- Hong Kong Polytechnic University
- Department of Mechanical Engineering
External person
Carolyn R. Kaplan
- Naval Research Laboratory
- Laboratory for Computational Physics and Fluid Dynamics
- AIAA
External person