No photo of Teik Lim

View Scopus Profile

Teik Lim

Calculated based on number of publications stored in Pure and citations from Scopus
1988 …2023

Research activity per year

Filter
Conference contribution

Search results

  • 2023

    EFFECT OF TOOL PROFILE MODIFICATION ON THE LOADED CONTACT PERFORMANCE FOR FACE-HOBBED HYPOID GEAR

    Wei, X., Wang, Y. & Lim, T., 2023, 2023 International Power Transmission and Gearing Conference (PTG). American Society of Mechanical Engineers (ASME), v011t11a022. (Proceedings of the ASME Design Engineering Technical Conference; vol. 11).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2019

    A lubrication model of elliptical point contact for spiral bevel gears with asymmetric varying velocity

    Gopalakrishnan, S. C., Lim, T. C. & Wang, Y., 2019, 2019 International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Optimization of machine tool settings on hypoid gear dynamics

    Lin, C. C., Wang, Y., Lim, T. C. & Zhang, W., 2019, 2019 International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Scopus citations
  • 2017

    Coupled dynamic characteristics of wind turbine gearbox driven by ring gear considering gravity

    Zhang, A., Wei, J., Qin, D., Hou, S. & Lim, T. C., 2017, 2017 ASME International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Scopus citations

  • Friction model using full elastohydrodynamic lubrication for spiral bevel gears

    Gopalakrishnan, S. C., Wang, Y. & Lim, T. C., 2017, 2017 ASME International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Scopus citations

  • Friction torque modelling and efficiency analysis of the preloaded inverted planetary roller screw mechanism

    Qiao, G., Liu, G., Ma, S., Shi, Z. & Lim, T. C., 2017, 2017 ASME International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Scopus citations

  • Optimization of hypoid gear design and tooth contact analysis

    Sun, S., Wang, S., Wang, Y., Lim, T. C., Zhou, B. & Hu, Z., 2017, 2017 ASME International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    4 Scopus citations
  • 2016

    Mapping rules between the gear hobbing processing technique and gear geometric errors

    Wang, S., Sun, S., Zhou, B., Wang, Y. & Lim, T. C., 2016, International Conference on Power Transmissions, ICPT 2016. Qin, D. & Shao, Y. (eds.). CRC Press/Balkema, p. 823-828 6 p. (Power Transmissions - Proceedings of the International Conference on Power Transmissions, ICPT 2016; vol. 0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Modeling of axle system with emphasis on tapered roller bearing contact analysis and stiffness calculation

    Wang, Y., Lim, T. C., Li, X. & Zhang, Y., 2016, International Conference on Power Transmissions, ICPT 2016. Qin, D. & Shao, Y. (eds.). CRC Press/Balkema, p. 217-222 6 p. (Power Transmissions - Proceedings of the International Conference on Power Transmissions, ICPT 2016; vol. 0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Scopus citations

  • Multi-reference time-frequency active control of vehicle interior road noise

    Feng, T., Sun, G., Li, M. & Lim, T. C., 2016, Structural Health Monitoring, Damage Detection. Wicks, A. & Niezrecki, C. (eds.). Springer New York LLC, p. 121-128 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Scopus citations

  • Tooth contact and load distribution analyses of cycloid drives with tooth profile modification

    Li, X., Li, C., Chen, B., Wang, Y., Lim, T. C. & Wang, S., 2016, International Conference on Power Transmissions, ICPT 2016. Qin, D. & Shao, Y. (eds.). CRC Press/Balkema, p. 137-146 10 p. (Power Transmissions - Proceedings of the International Conference on Power Transmissions, ICPT 2016; vol. 0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2015

    Frequency domain inverse model LMS algorithm for active sound tuning system of powertrain noise

    Feng, T., Sun, G., Xu, J., Li, M. & Lim, T. C., 2015, 22nd International Congress on Sound and Vibration, ICSV 2015. International Institute of Acoustics and Vibrations, (22nd International Congress on Sound and Vibration, ICSV 2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Scopus citations

  • The generation principle and mathematical models of double-enveloping internal gear pairs

    Li, X., Chen, B., Wang, Y., Sun, G. & Lim, T. C., 2015, ASME 2015 Power Transmission and Gearing Conference; 23rd Reliability, Stress Analysis, and Failure Prevention Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2014

    Active control of vehicle powertrain noise using inverse model LMS algorithm

    Sun, G., Feng, T., Li, M., Xu, J. & Lim, T. C., 2014, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Davy, J., Burgess, M., Don, C., Dowsett, L., McMinn, T. & Broner, N. (eds.). Australian Acoustical Society, (INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Scopus citations
  • 2013

    Torque load effects on mesh and dynamic characteristics of hypoid geared system

    Wang, Y., Lim, T. C. & Yang, J., 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T11A018. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    8 Scopus citations
  • 2012

    Enhanced inverse model LMS algorithm for active control of harmonic response clusters

    Li, M., Duan, J. & Lim, T. C., 2012, 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012. p. 9812-9820 9 p. (41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012; vol. 12).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Scopus citations

  • Modified filtered-x LMS algorithm for active control of vehicle road impact noise

    Sun, G., Li, M. & Lim, T. C., 2012, 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012. p. 58-69 12 p. (41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Scopus citations

  • Numerical analysis of active vibro-acoustic control in an enclosed cavity

    Elwali, W., Lim, T. C. & Li, M., 2012, ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012, NCAD 2012. American Society of Mechanical Engineers (ASME), p. 53-59 7 p. (American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCAD).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Scopus citations

  • Numerical analysis of active vibro-acoustic control in an enclosed cavity

    Elwali, W., Lim, T. C. & Li, M., 2012, 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012. p. 23-29 7 p. (41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2011

    Computational tooth root stress analysis of crossed beveloid gears with small shaft angle

    Song, C., Zhu, C., Lim, T. C. & Fan, R., 2011, Advances in Power Transmission Science and Technology. p. 188-191 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    9 Scopus citations

  • Eccentricity effect analysis in right-angle gear dynamics

    Peng, T., Lim, T. C. & Yang, J., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. p. 411-424 14 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Scopus citations

  • Effect of gear tooth crack on spur gear dynamic response by simulation

    Shao, Y., Wang, X., Chen, Z. & Lim, T. C., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. p. 405-409 5 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Scopus citations

  • Effects of assembly errors on crossed beveloid gear tooth contact and dynamic response

    Zhu, C., Song, C., Lim, T. C. & Peng, T., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. p. 379-387 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    13 Scopus citations

  • Nonlinear dynamic simulation of hypoid gearbox with elastic housing

    Yang, J. & Lim, T. C., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. p. 437-447 11 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    11 Scopus citations
  • 2010

    Active noise control of magnetic resonance imaging scanner using inverse modeling technique

    Li, M., Rudd, B. W., Lim, T. C. & Lee, J. H., 2010, 24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America. p. 99-107 9 p. (24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Scopus citations

  • A novel delayless frequency domain filtered-x least mean square algorithm for vehicle powertrain noise control

    Duan, J. & Lim, T. C., 2010, 24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America. p. 90-98 9 p. (24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Scopus citations

  • Engineering education through degree-long project, a new project based learning approach

    Kim, J., Lim, T., Allemang, R. & Rost, B., 2010, Engineering Education and Professional Development. American Society of Mechanical Engineers (ASME), p. 443-449 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • In-situ active noise cancellation applied to Magnetic Resonance Imaging

    Rudd, B. W., Li, M., Lim, T. C. & Lee, J. H., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. American Society of Mechanical Engineers (ASME), p. 193-198 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Two-substructure, time-domain transfer path analysis of transient dynamic response of mechanical systems with nonlinear coupling

    Jiang, W. & Lim, T. C., 2010, 24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America. p. 783-790 8 p. (24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Scopus citations
  • 2008

    A fast numerical model for vehicle interior acoustics

    Sorosiak, E. J., Li, M., Lim, T. C., Abe, T., Lee, M. R., Cheng, M. T. & Vanhaaften, W., 2008, Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08. p. 1467-1476 10 p. (Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Scopus citations

  • An active noise control system for tuning vehicle interior Response

    Li, M., Sorosiak, E. J., Lim, T. C., Duan, J., Abe, T., Lee, M. R., Cheng, M. T. & Vanhaaften, W., 2008, Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08. p. 777-783 7 p. (Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Scopus citations

  • Dynamics of hypoid gears with emphasis on effect of shaft rotation on vibratory response

    Peng, T. & Lim, T. C., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 377-383 7 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Scopus citations

  • Evaluation of MRI compatible headphones for active noise cancellation

    Rudd, B. W., Lim, T. C. & Lee, J. H., 2008, Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08. p. 748-753 6 p. (Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Scopus citations

  • Simulated study of active acoustic noise control of a magnetic resonance imaging scanner response

    Li, M., Rudd, B. W., Lim, T. C. & Lee, J. H., 2008, Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08. p. 742-747 6 p. (Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sound quality analysis of the combined aerodynamic and power transmission noise with application to rotorcraft interior response

    Sondkar, P. B., Lim, T. C. & Celmer, R. D., 2008, Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08. p. 1528-1535 8 p. (Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2006

    Dynamic analysis of high speed rail-vehicle collisions

    Kulkarni, V. & Lim, T. C., 2006, IMAC-XXIV: Conference and Exposition on Structural Dynamics - Looking Forward: Technologies for IMAC. (Conference Proceedings of the Society for Experimental Mechanics Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Tuning out-of-phase torsion modes to reduce gear whine

    Lim, T. C. & Wang, J., 2006, Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006. p. 10-16 7 p. (Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2005

    Active shaft transverse vibration control of a spur gear pair system

    Lim, T. C. & Li, M., 2005, Proc. of the ASME Int. Des. Eng. Techn. Conf. and Comput. and Inf. in Eng. Conf. - DETC2005: 17th International Conference on Design Theory and Methodology. Power Transmission and Gearing Conference.. American Society of Mechanical Engineers, p. 807-813 7 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Effects of assembly errors on hypoid gear mesh and dynamic response

    Lim, T. C. & Wang, J., 2005, Proc. of the ASME Int. Des. Eng. Techn. Conf. and Comput. and Inf. in Eng. Conf. - DETC2005: 17th International Conference on Design Theory and Methodology. Power Transmission and Gearing Conference.. American Society of Mechanical Engineers, p. 801-806 6 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    14 Scopus citations

  • Nonlinear tooth impacts in hypoid transmissions

    Lim, T. C., 2005, IMAC-XXIII: Conference and Exposition on Structural Dynamics - Structural Health Monitoring. (Conference Proceedings of the Society for Experimental Mechanics Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2000

    DYNAMICS OF HYPOID GEAR TRANSMISSION WITH NON-LINEAR TIME-VARYING MESH

    Cheng, Y. & Lim, T. C., 2000, 8th International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), p. 611-617 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    15 Scopus citations
  • 1998

    Dynamic analysis of high speed hypoid gears with emphasis on automotive axle noise problem

    Cheng, Y. & Lim, T. C., 1998, 1998 Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    13 Scopus citations