A numerical simulation of the cavity filling process with PVC in injection molding

Keyphrases

• Numerical Simulation 100%
• Polymer Melt 100%
• Injection Molding 100%
• Cavity Filling 100%
• Execution Time 100%
• Filling Process 100%
• Polyvinyl Chloride 100%
• Low Temperature 50%
• High Pressure 50%
• Computing Facility 50%
• Resin 50%
• Heat-induced 50%
• Analytic Solution 50%
• Temperature Profile 50%
• Equation of State 50%
• Velocity Profile 50%
• Lower Limit 50%
• Constant Density 50%
• Constant Pressure 50%
• Time Requirement 50%
• Gating System 50%
• Flow Problems 50%
• Thermal Degradation 50%
• Power-law Fluid 50%
• Total Pressure Drop 50%
• Disk Cavity 50%
• Runner System 50%
• Transport Approach 50%
• Separation Radius 50%
• Degradation Effect 50%
• Equations of Change 50%
• General Transport Equation 50%
• Time Increment 50%
• Outer Radius 50%
• Non-steady-state Flow 50%
• Storage Time 50%
• Top Plate 50%
• Filling Time 50%
• Mold Filling 50%
• Digital Computation 50%
• Cavity Wall 50%
• Mold Cavity 50%

Engineering

• Computer Simulation 100%
• Injection Moulding 100%
• Execution Time 100%
• Filling Process 100%
• Energy Engineering 50%
• Low-Temperature 50%
• Pressure Drop 50%
• Lower Limit 50%
• Equation of State 50%
• Temperature Profile 50%
• Velocity Profile 50%
• Constant Density 50%
• Flow Problem 50%
• Thermal Degradation 50%
• Runner System 50%
• Cold Mold 50%
• Mold Filling 50%
• Digital Computation 50%
• State Flow 50%
• Mould Cavity 50%
• Outer Radius 50%
• Power Law Fluid 50%
• Flowing Material 50%