A Special Issue on Modeling and nanofabrication of 1D and 2D materials

TY - JOUR

T1 - A Special Issue on Modeling and nanofabrication of 1D and 2D materials

AU - Yang, Eui Hyeok

AU - Kang, Kyungnam

AU - Datta, Dibakar

AU - Ding, Junjun

AU - Hader, Grzegorz

N1 - Funding Information: Grzegorz (Greg) Hader is a mechanical engineer at the U.S. Army Armaments Research, Development, and Engineering Center (ARDEC), located at Picatinny Arsenal, NJ. Mr. Hader graduated with his B.S. in Mechanical Engineering from Virginia Polytechnic Institute and State University in 2002 and was recruited by ARDEC, where he joined the Fuze and Precision Armaments Directorate, technically supporting inertial measurement unit research and development for precision munitions. His areas of research include modeling, fabrication, and characterization of both NEMS and MEMS sensors and devices utilizing 1D and 2D materials. He is the three-time recipient of the ARDEC Science Fellowship and has been awarded multiple In-house Laboratory Independent Research grants at ARDEC. Mr. Hader is highly active in peer reviews of journal paper publications including IEEE Sensors, Journal of Energetic Materials, Journal of Colloid and Interface Science, Nanoscience and Nanotechnology Letters, Chemistry of Materials, Scientific Reports, and MDPI Sensors. He holds memberships with ASME, IEEE, MRS and ARRL and participates on the ASME MEMS Division board and IEEE Sensors Council. Funding Information: Dr. Eui-Hyeok Yang is a full professor of Mechanical Engineering Department at Stevens Institute of Technology. He received his Ph.D. degree from Ajou University, Korea. After his postdoctoral training at University of Tokyo and at California Institute of Technology, he joined NASA’s Jet Propulsion Laboratory (JPL) where he became a Senior Member of the Engineering Staff. At JPL, he received numerous awards, including NASA ICB Space Act Awards, Bonus (Level B and C) Awards and multiple Class 1 NASA Tech Brief Awards. In recognition of his excellence in advancing the use of MEMS-based actuators for NASA’s space applications, he received the prestigious Lew Allen Award for Excellence at JPL in 2003. Since joining Stevens in 2006, he has been responsible for obtaining competitive research funding from several federal agencies including NSF, AFOSR, US Army, NRO, NASA and DARPA (including 6 NSF and 3 AFOSR grants, and 5 NASA and 3 NRO contracts). Overall, Dr. Yang has received more than 35 grants over the course of his career totaling more than $7,500,000. In addition to an active teaching course load, he is credited with advising more than 100 students at the high school, undergraduate, graduate, and post graduate levels. His commitment to contributing to the scientific community is also demonstrated in the more than 150 journals that he has reviewed over the span of his career. Dr. Yang’s service to the professional Community also includes formal appointments such as Editorial Board Member of Nature’s Scientific Reports, Associate Editor of IEEE Sensors, Associate Editor of Nanoscience and Nanotechnology Letters. He was Division Chair of the ASME MEMS Division. Dr. Yang has provided over 80 keynotes and invited presentations and seminars at various academic and industrial events. Funding Information: Dr. Junjun Ding is an assistant professor of Materials Science and Engineering at Inamori School of Engineering, New York State College of Ceramics at Alfred University. He received his Ph.D. degree from Stevens Institute of Technology, USA and M.S. and B.S. degrees from University of Science and Technology of China. His research interests include scalable micro- and nanomanufacturing, additive manufacturing, nanomaterials, and flexible electronics. He was a recipient of the American Society of Mechanical Engineers (ASME) Travel Award (2016) sponsored by National Science Foundation (NSF), and Travel Grants for the International Conferences on Electron, Ion, and Photonic Beam Technology and Nanofabrication (EIPBN). Dr. Ding served as a program committee member and a session organizer for EIPBN and ASME conferences, and a reviewer of multiple journals including Scientific Reports, Nanotechnology, Journal of Micromechanics and Microengineering, and IEEE Sensors.

PY - 2018/7

Y1 - 2018/7

UR - https://www.scopus.com/pages/publications/85034615626

UR - https://www.scopus.com/pages/publications/85034615626#tab=citedBy

U2 - 10.1016/j.nanoso.2017.10.007

DO - 10.1016/j.nanoso.2017.10.007

M3 - Editorial

AN - SCOPUS:85034615626

SN - 2352-507X

VL - 15

SP - 61

EP - 62

JO - Nano-Structures and Nano-Objects

JF - Nano-Structures and Nano-Objects

ER -