CONTROL SYSTEM DESIGN USING RADIOACTIVE PICKOFF.

Bernard Friedland, Jack Richman

Research output: Contribution to journalConference articlepeer-review

Abstract

An accelerometer can be constructed using a radioactive proof mass the position of which can be determined on the basis of the difference between the mean number of emitted charged particles detected at opposite walls when the proof mass is not centered. If the emission rate is relatively small, however, the mean counting rate is very noisy; satisfactory operation requires optimum signal processing. The control system, designed by linear stochastic control theory, generates forces that tend to keep the proof mass centered between walls of the instrument and simultaneously produces an estimated acceleration output. The Poisson-type noise of the pickoff is approximated by Gaussian noise; the acceleration input is modeled as a random walk. It is found by simulation that for an instrument with 1. 0 inch spacing between the walls, the proof mass excursion can be confined to a peak-to-peak amplitude of 0. 36 inch in a severe acceleration environment. The accelerometer output tracks a constant input without error and, when the input acceleration has a random component, the rms error is of the order of ten percent of the random component.

Original languageEnglish (US)
Pages (from-to)422-427
Number of pages6
JournalProceedings of the IEEE Conference on Decision and Control
DOIs
StatePublished - 1975
Externally publishedYes
EventProc IEEE Conf Decis Control Incl Symp Adapt Processes 14th - Houston, TX, USA
Duration: Dec 10 1975Dec 12 1975

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Modeling and Simulation
  • Control and Optimization

Fingerprint Dive into the research topics of 'CONTROL SYSTEM DESIGN USING RADIOACTIVE PICKOFF.'. Together they form a unique fingerprint.

Cite this