TY - JOUR
T1 - The role of third cation doping on phase stability, carrier transport and carrier suppression in amorphous oxide semiconductors
AU - Reed, Austin
AU - Stone, Chandon
AU - Roh, Kwangdong
AU - Song, Han Wook
AU - Wang, Xingyu
AU - Liu, Mingyuan
AU - Ko, Dong Kyun
AU - No, Kwangsoo
AU - Lee, Sunghwan
N1 - Publisher Copyright:
© 2020 Royal Society of Chemistry. All rights reserved.
PY - 2020/10/21
Y1 - 2020/10/21
N2 - Amorphous oxide semiconductors (AOSs), specifically those based on ternary cation systems such as Ga-, Si-, and Hf-doped InZnO, have emerged as promising material candidates for application in next-gen transparent electronic and optoelectronic devices. Third cation-doping is a common method used during the manufacturing of amorphous oxide thin film transistors (TFTs), primarily with the intention of suppressing carrier generation during the fabrication of the channel layer of a transistor. However, the incorporation of a third cation species has been observed to negatively affect the carrier transport properties of the thin film, as it may act as an additional scattering center and subsequently lower the carrier mobility from ~20-40 cm2V-1s-1of In2O3or a binary cation system (i.e., InZnO) to ~1-10 cm2V-1s-1. This study investigates the structural, electrical, optoelectronic, and chemical properties of the ternary cation material system, InAlZnO (IAZO). The optimized carrier mobility (Hall Effect) of Al-doped InZnO is shown to remain as high as ~25-45 cm2V-1s-1. Furthermore, Al incorporation in InZnO proves to enhance the amorphous phase stability under thermal stresses when compared to baseline InZnO films. Thin film transistors integrating optimized IAZO as the channel layer are shown to demonstrate promisingly high field effect mobilities (~18-20 cm2V-1s-1), as well as excellent drain current saturation and high drain current on/off ratios (>107). The high mobility and improved amorphous phase stability suggest strong potential for IAZO incorporation in the next generation of high performance and sustainable optoelectronic devices such as transparent displays.
AB - Amorphous oxide semiconductors (AOSs), specifically those based on ternary cation systems such as Ga-, Si-, and Hf-doped InZnO, have emerged as promising material candidates for application in next-gen transparent electronic and optoelectronic devices. Third cation-doping is a common method used during the manufacturing of amorphous oxide thin film transistors (TFTs), primarily with the intention of suppressing carrier generation during the fabrication of the channel layer of a transistor. However, the incorporation of a third cation species has been observed to negatively affect the carrier transport properties of the thin film, as it may act as an additional scattering center and subsequently lower the carrier mobility from ~20-40 cm2V-1s-1of In2O3or a binary cation system (i.e., InZnO) to ~1-10 cm2V-1s-1. This study investigates the structural, electrical, optoelectronic, and chemical properties of the ternary cation material system, InAlZnO (IAZO). The optimized carrier mobility (Hall Effect) of Al-doped InZnO is shown to remain as high as ~25-45 cm2V-1s-1. Furthermore, Al incorporation in InZnO proves to enhance the amorphous phase stability under thermal stresses when compared to baseline InZnO films. Thin film transistors integrating optimized IAZO as the channel layer are shown to demonstrate promisingly high field effect mobilities (~18-20 cm2V-1s-1), as well as excellent drain current saturation and high drain current on/off ratios (>107). The high mobility and improved amorphous phase stability suggest strong potential for IAZO incorporation in the next generation of high performance and sustainable optoelectronic devices such as transparent displays.
UR - http://www.scopus.com/inward/record.url?scp=85093847314&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85093847314&partnerID=8YFLogxK
U2 - 10.1039/d0tc02655g
DO - 10.1039/d0tc02655g
M3 - Article
AN - SCOPUS:85093847314
SN - 2050-7534
VL - 8
SP - 13798
EP - 13810
JO - Journal of Materials Chemistry C
JF - Journal of Materials Chemistry C
IS - 39
ER -